Advertisement
Turn on the Headset by pressing and holding the CALL Control button for at
least 1 second.
2. Place the LG Bluetooth Headset HBM-300 in pairing mode.
Press and hold the CALL Control button for at least 5 second while listening
for a beeping sound. You should hear a series of beeps followed by a
connection signal. The blue LED indicator light begins to flash once every
second.
3. Set your LG Bluetooth Headset HBM-300 to "discover"
Follow the instruction guide for your phone. This usually involves going to a
"setup", "connect", or "Bluetooth" menu on your phone and then selecting
the option to "discover" or "add" a Bluetooth device.
4. Your phone will find "HBM-300"
You will be prompted to accept the pairing by pressing "Yes" or "Ok" on the
Handset and to confirm with the passkey or PIN⁴= 0000 (4 zeros). You will
receive confirmation when pairing is complete. If pairing is unsuccessful,
repeat steps 1-4.
If pairing is successful, the blue LED indicator light will flash in standby
mode every 5 seconds. If pairing fails, the blue LED indicator light will flash
once every second. Please repeat these steps.
NOTE) Pairing can be done with up to 3 Handsets maximum
1 The LG Bluetooth Headset HBM-300 stores up to 3 different Handset
registrations in memory.
2 If you add a 4th Handset, the LG Bluetooth Headset HBM-300 will
automatically remove the registration information of the least used
3 Priority is given to the Handset most recently paired.
4 When you want to change the Handset priority, try to connect manually from
the Handset.
Tip)
Once a Handset is registered to the LG Bluetooth Headset HBM-300 , it will be
stayed in paired status until deleted.
Basic usage of your LG Bluetooth HBM-300 Headset
1. To answer a call
Press the CALL Control button to capture and transfer the call to the
headset.
2. To reject a call
Press the CALL Control button for at least 2 seconds.
3. To end a call
Press the CALL Control button for at least 2 seconds.
Handset.
Advertisement
