Play; Play Cd; Stream Music From A Upnp Device / Pc; Install Windows Media Player 11 - Philips MCI300/05 User Manual

Wireless micro hi-fi system
Hide thumbs Also See for MCI300/05:
Table of Contents

Advertisement

5 Play

Play CD

1
Press to open the CD tray.
2
Insert CD with printed side facing up.
3
Press to close the CD tray.
4
Press OK /
to play.
Stream music from a UPnP
device / PC
You can stream music to the MCi300 from a
connected UPnP device such as a PC, if you
install the Windows Media Player 11 on the
PC and configure the PC to share your music.
(If the Windows Media Player 11 is already
installed on the PC, you can skip the installation
section and continue with the configuration.)

Install Windows Media Player 11

1
On the PC, insert the supplied software
CD.
»
Installation starts.
»
If installation does not start, click on
the icon in your Explorer program.
2
Follow the instructions on the PC to install
Windows Media Player 11.

Configure a PC to share music

You can share music from a PC with the
MCi300.
1
Follow the instructions to install the
Windows Media Player 11.
2
On the PC, click Start > Programs >
Windows Media Player.
3
In the Windows Media Player interface,
click on the Library pull-down menu and
select Media sharing....
4
In the Media sharing... pop-up window,
select Share my media, then confirm with
OK.
When the MCi300 is connected to
»
your home network, the display shows
the MCi300 with an alert icon:
5
Click on the MCi300.
6
Select Allow, then confirm with OK.
7
On the MCi300, press HOME.
8
Press or , then to select[UPnP].
»
It can take a few minutes until the PC
is ready to share media.
»
The display shows [Searching for UPnP
servers...], followed by the list of media
servers.
9
Press or , then to select the PC.
10
Press or to select a track, then press
OK /
to play (see 'Play' on page 13).

Internet radio

Note
Internet radio features require broadband Internet
access.
Internet radio features require registration.

Register the MCi300 with Philips

1
The following steps show you how to
register the Internet radio feature.
2
Ensure that the MCi300 is turned on.
3
Ensure that the MCi300 is connected to
the Internet.
4
Ensure you have a valid email address.
5
Press INTERNET RADIO.
The display shows the Internet radio
»
registration screen.
6
Press alphanumeric buttons on the remote
control to enter the valid email address.
EN
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mci300/12

Table of Contents