Table of Contents
Advertisement
Air Cleaning Mode
Convenient
Functions Mode
Self-diagnosis
Function
Error Symptom
Gas Sensor Error
Indoor Room Temperature Sensor Error
Auto Shutter Error
Perfect Air Cleaning Fan Motor Error
Communication between Main PCB and Panel PCB Error
Indoor Piping Temperature Sensor(Open/Short)
Outdoor Piping Temperature Sensor(Open/Short)
Samsung Electronics
Perfect Air Cleaning
Anion
Perfect Cleaning
Air Flow Speed
Operates the indoor fan motor(Turbo) and compressor for
Turbo
30 minutes regardless of the set temperature and put down the
Air Flow Blades(Up/Down).
Digital Flow
Available for Cooling/Heating only.
If you select any existing mode, Turbo, Save, or Health mode
will be cancelled.
Temperature will be set up by Cooling/Heating condition.
Fan speed will be set up by Cooling/Heating condition.
Save
If you set Save at the preset temperature below 25˚C,
The preset temperature will change to 26˚C to increase the room
temperature by degrees.
If you set Save at the preset temperature over 26˚C,
The preset temperature will go up minutely.
To raise dust collecting efficiency, the Air Flow Blade(Up/Down)
will start rotating automatically.
Health
Displays an error message on the temperature display window of Panel Display.
Operates Dust Collector.
Operates Anion Generator.
Controls Perfect Cleaning Air Flow Speed.
(Low, Medium, High, Turbo)
Starts Perfect Air cleaning and generates anions.
Main body LED display
Operating Instructions
3
Advertisement
Table of Contents
