Radio, Rds - Philips MC145 Owner's Manual

T
SO UR CE
SH UF FLE
SID E A/B
PR OG RA
M
DS C
INC RE DIB LE
SU RR OU ND
TU NI NG
Tuning to radio stations
1 Press SELECT SOURCE repeatedly to display TUNER.
2 Select a wave band by pressing BAND repeatedly.
The selected waveband is shown.
3 Keep 5 TUNING 6 (5 or 6 on the remote control)
pressed for approximately 1 second.
SEARCH is displayed and the radio tunes to a
station with sufficient strength. If an FM station is
received in stereo, is shown.
STEREO
4 Repeat searching until you find the desired station.
• To tune to a weak station briefly press 5 TUNING 6
(5 or 6 on the remote control) as often as necessary
for optimum reception.
Programming radio stations
You may store up to 30 radio stations. The unit can select
and program stations by itself or you may choose them
yourself.
RD S/N EW S
Automatic programming
TA PE CO UN
TER
D BB
Automatic programming will start at a chosen preset
number. From this preset number upwards, former
BA ND
TIM ER ON /OF
F
programmed radio stations will be overwritten. The unit
will only program stations which are not in the memory
CL OC K/T IM
ER
already.
1 Press 4 PRESET 3 (PREV. ¡ or NEXT ™ on the remote
control) to select the preset number where programming
should start.
2 Keep PROGRAM on the unit pressed for more than
2 seconds.
AUTO is displayed and available stations are
programmed. Then the radio station using the highest
preset number is played.
Manual programming
1 Tune to a desired radio station (see "Tuning to radio
stations").
2 Press PROGRAM on the unit.
flashes.
PROGRAM
3 Press 4 PRESET 3 (PREV. ¡ or NEXT ™ on the remote
control) to assign a number from 1 to 30 to this station.
4 Press PROGRAM on the unit to confirm the setting.
goes off, the preset number and the
PROGRAM
frequency of the preset station are displayed.
Tuning to preset stations
• Press 4 PRESET 3 (PREV. ¡ or NEXT ™ on the remote
control) until the preset number of the desired station is
displayed.
RADIO
11