Working With Android - GoVideo SONA Setup And Walkthrough Manual

Working with Android

Before you can begin:
GoVideo cameras can only
be connected to 2.4GHz
WiFi networks. Please
ensure your phone/tablet
is connected to the same
2.4GHz network that
you want to connect your
GoVideo camera to.
Step 1
Find the UID in the list of
cameras that matches the UID
on the back of your camera.
Select the gear
UID to enter Setup.
12
Step 2
Once you are in the Setup
category, select the WiFi Setup.
icon next to the
Step 3 Step 4
If the WiFi is turned off in the Select the WiFi network you want
settings of your Android device to connect the camera to and
you will see this screen. Please then select Next.
turn on your WiFi in the device
settings and select Next. If your
WiFi is already turned on in
your Android device you will
not see this screen and can skip
this step.
Step 5
Enter the WiFi password for the
WiFi network you want to con-
nect to and then select Next.
Note: You can select the eye icon in the
password box to reveal the password to
ensure it has been entered correctly. .
13