LCD Transmitter Operation and Confirmations
Basic Operations
Function
Lock
Unlock
Start
Stop
Trunk
Start/Stop While in Safe Start Mode
Function
Start on safe start
mode
Stop on safe start
mode
Missing a Start or a Stop Confirmation
If you have not received a Start or the Stop confirmation after pressing the
the
button. Pressing the
started or stopped.
No Start Confirmation Was Received:
If after remote starting the vehicle no confirmation was received, simply press the
will refresh the display. If the vehicle was started successfully, the
the run time countdown. Pressing the
If the doors were already locked prior to pressing the
status of the doors i.e. the doors will remain locked.
On models where starter kills were installed, pressing the
kill.
No Stop Confirmation Was Received:
If after remote stopping the vehicle no confirmation was received i.e. the display did not return to
its basic state simply press the
stopped, the
icon will disappear and the time will be displayed.
Pressing the
button will also lock all doors (the lock icon will appear). If the doors were already
locked prior to pressing the
doors will remain locked.
On models where starter kills were installed, pressing the
kill.
P. 16
Button press
+
+
+
+
Button press
+
x 2
+
button will refresh the display and will confirm if the vehicle was
button, there will be no change in the status of the doors i.e. the
Icon
None
Icon
Sound
Melody
+
None
Melody
button will also lock all doors (the lock icon will appear).
button, there will be no change in the
button, this will refresh the display. If the engine was
(Second Car Control)
Sound
1 beep
2 beeps
Melody
+
Melody
1 Beep
Description
Press
simultaneously twice within 3
seconds. Press for 1 sec- a beep
will be heard- then press 1 sec
and a melody will be heard
again.
button, simply press
icon will appear as well as
button will also activate the starter
button will also activate the starter
+
button, this
User Guide