Preparations; Rear Connections - Philips FWC527/37 User Manual

AM loop
antenna
speaker
(right)

Rear Connections

The type plate is located at the rear of the
system.
A
Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B
R L
AUX/
CDR
IN
AM ANTENNA FM ANTENNA
C
+
R
—
—
L
+
SPEAKERS 6Ω
AC power cord
B
Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
¶ Position the antenna as far as possible from a TV,
VCR or other radiation source.

Preparations

FM wire antenna
speaker
AC
MAINS
Fix the claw
to the slot
(left)
A
9