Plantronics PA50 Getting Started

PA50 Wireless Mic
Getting Started
Refer to the safety instructions at the end of this guide prior to installation or use. For the full
User Guide, visit www.plantronics.com/calisto800
The PA50 wireless mic is designed for use with the Calisto 800 series of multi-device
speakerphones. The wireless mic provides unparalleled freedom of movement and optimal
voice transmission.
1: Setup
/!\ Disconnect all cables from the Calisto base.
Insert wireless mic docking station firmly into the slots at the
bottom of the base.
Reconnect all cables. Place the wireless mic in the docking
station and charge it it for a minimum of 2 hours or until the
Calisto screen indicates the mic is fully charged.
2: Pairing
Once the wireless mic is fully charged, on the Calisto
speakerphone, go in Menu > Settings > Bluetooth Setup
and select "Headset (or Wireless Mic)" and then "Pair New
Headset".
Put the wireless mic in pairing mode by pressing the
button for 6 seconds or until the light flashes red/green.
Press "Next" to prompt Calisto to search for it.
Follow the instructions on screen to complete pairing. Once it
is paired, the wireless mic is connected.
3: Wearing and Use
The wireless mic can be worn on a collar or lapel, see diagram
for optimal location.
The wireless mic can also be placed flat on a table for flexible
small group conferencing. It provides 360- degree microphone
coverage.
Talk Time: Up to 7 hours
Maximum range: Up to 45 feet/12 meters