Philips FW-V28 User Manual page 9

Controls on the system and
remote control
1 STANDBY ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 DBB (DYNAMIC BASS BOOST)
– to switch on bass boost, to enhance
bass response or to switch off bass
boost.
3 DIGITAL SOUND CONTROL
DISPLAY PANEL
– to view the desired DSC display.
4 DSC (DIGITAL SOUND CONTROL)
– to select the desired sound effect :
OPTIMAL, JAZZ, ROCK or TECHNO.
5 PROGRAM
for VCD/CD ... to program disc tracks.
for TUNER ..... to program preset radio
stations.
for CLOCK ..... to select 12- or 24-
hour in clock setting
mode (on the system
only) .
6 MICROPHONE
– to connect microphones jack.
7 MIC LEVEL
– to adjust the mixing level for karaoke
or microphone recording.
8 RECORD
– to start recording on tape deck 2 only.
9 DISPLAY SCREEN
– to view the current setting of the
system.
Untitled-1 9
0 DISC CAROUSEL TRAY
! DISC CHANGE
– to change disc(s).
@ OPEN•CLOSE
– to open or close the disc carousel tray.
# DISC 1 / DISC 2 / DISC 3
(DISC DIRECT PLAY)
– to select a disc tray for playback.
$ SOURCE – to select the following:
VCD / (CD 1•2•3)
– to select VCD/CD mode. When VCD/
CD playback is stopped, press to
select the disc tray 1, 2 or 3.
PAL / NTSC
– to select corresponding PAL or NTSC
system of your TV set (exception
Multi-system TV).
TUNER / (BAND)
– to select Tuner mode. When in tuner
mode, press to select the waveband:
FM or MW.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
AUX / (VIDEO)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder).
% MODE SELECTION
SEARCH•TUNING à á
for VCD only .. to move the zoom
picture to the left or
right.
for VCD/CD ... to search backward/
forward.
for TUNER ..... to tune to a lower or
higher radio frequency.
for TAPE ........ to rewind or fast
forward on tape.
for CLOCK ..... to set the hour (on the
system only) . ^ VOLUME
STOP•CLEAR Ç –
for VCD/CD ... to stop disc playback or & DIM
to clear a program. –
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
* n
recording on tape deck
2 only. –
for DEMO ...... (on the system only) to
( CLOCK•TIMER
start or stop –
demonstration mode.
PLAY•PAUSE É Å
) RETURN
for VCD/CD ... to start or interrupt –
playback.
for VCD only...to watch a still picture.
for TAPE ........ to start playback. ¡ PBC (PLAYBACK CONTROL)
PREV í / NEXT ë (PRESET 43 )
–
for VCD only...to move the zoom
picture down or up. ™ A. REPLAY (AUTO REPLAY)
for VCD with PBC on .......................... –
...................... to select next or
previous MENU.
...................... to select next or £ DUBBING
previous VCD entry –
level track during ≤ TAPE DECK 2
playback. ∞ TAPE DECK 1
31/05/2001, 11:35 AM
CONTROLS
for VCD/CD ... to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset
station in memory.
for CLOCK ..... to set the minute (on
the system only).
to increase or decrease the volume.
to select different brightness for the
display screen : DIM 1, DIM 2, DIM 3
or DIM OFF.
to connect headphones.
to view the clock, set the clock or set
the timer.
for VCD with PBC on to return to the
previous MENU level during playback
(for VCD version 2.0 only).
to switch on or off PBC mode (for VCD
version 2.0 only).
to select playback mode either in
continuous AUTO REPLAY or ONCE
only.
to dub a tape in normal speed.
9
3139 116 20021