Loading The Cd Changer; Disc Change - Philips FW-C38C/37 User Manual

15
DISC 1

DISC CHANGE

3 C D
C H A N G E R
C10
FW- MINI HIFI SYSTEM
STANDBY-ON
JOG
C D 1 • 2 • 3 FM • AM
CONTROL
CD TUNER
TUNING
SEARCH
PROGRAM RECORD DUBBING A.REPLAY
SOUND NAVIGATION - JOG
Warning!
1) This system is designed for conventional CDs. Do not use any accessories
such as disc stabilizer rings or CD treatment sheets, etc., which may
damage the CD mechanism.
2) Do not load more than one disc into each tray.
3) When the CD changer is loaded with CDs, do not turn over or shake the
system. This may jam the changer.
You may load three discs in the CD changer for continuous playback
without interruption.
pg 01-29/C38/37-En
DISC 2 DISC 3
OPEN • CLOSE
•
3 CD ROTARY CHANGER SYSTEM 3 CD ROTARY CHANGER SYSTEM
CD REWRITABLE COMPATIBLE CD REWRITABLE COMPATIBLE •
•
CD SYNCHRO RECORDING CD SYNCHRO RECORDING
MASTER
TAPE 1 • 2 CDR/VIDEO
VOLUME
TAPE AUX
PRESET
STOP• CLEAR PLAY• PAUSE PREV NEXT
INCREDIBLE
DIM SURROUND
•
CLOCK TIMER
15
CD
Discs for playback
This system can play all digital audio CD,
finalized digital audio CD-Recordable
and finalized digital audio CD-
Rewritable format discs.

Loading the CD Changer

1 Press CD to select CD mode.
2 Press OPEN•CLOSE.
™ The CD carousel tray slides out.
3 Load a CD with the printed side up
in the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC CHANGE button.
™ The CD carousel tray will rotate
until the empty tray is ready for
loading.
4 Press OPEN•CLOSE to close the
CD carousel tray.
™ The total number of tracks and
the playing time of the selected
disc appear on the display.
Note:
– To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
2/16/00, 9:01 AM
CD Direct Play
• You can play a CD directly by
pressing the DISC 1, DISC 2 or
DISC 3 button. The CD player will
stop at the end of playback of the
selected disc.
™ A lit button indicates that a disc is
loaded in the disc tray.
™ A flashing button indicates that a
disc is playing.
Playing a CD
1 PressÉ to start playback.
™ The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, pressÅ.
™ The playing time flashes.
• To resume playback, pressÉ again.
2 To stop playback, press Ç.
Note:
– All the available discs will play once,
then stop.
Disc Change
You can change the outer two discs
while the third inner disc is stopped or
is playing.
1 Press DISC CHANGE.
™ The CD carousel tray slides out.
2 Replace the discs in the left and right
disc trays.
3139 116 19811 (ENG)