NOTE:
The antenna is neither a handle, a key ring retainer, nor a speaker,
microphone attachment point. Using the antenna in these ways may
damage the antenna and degrade your transceiver's performance.
INSTALLING THE BELT CLIP
If necessary, install the belt clip into the location on the back of the battery.
(See Figure)
NOTE:
If the belt clip is not installed, its mounting location may get hot during
continuous transmission or under heated environment.
INSTALLING THE (OPTIONAL) SPEAKER/MICROPHONE
Insert the speaker/microphone plugs into the speaker/microphone jacks of
the transceiver.
NOTE:
The transceiver is not fully water resistant when using
speaker/microphone.