Fluke 753 User Manual page 15

•
Connect the common test lead before the
live test lead and remove the live test lead
before the common test lead.
•
Use only current probes, test leads, and
adapters supplied with the Product.
•
Do not touch the probes to a voltage
source when the test leads are connected
to the current terminals.
•
Use only cables with correct voltage
ratings.
Find Quality Products Online at:
•
•
•
GlobalTestSupply
www.
Documenting Process Calibrators
Safety Information
Do not use test leads if they are damaged.
Examine the test leads for damaged
insulation, exposed metal, or if the wear
indicator shows. Check test lead
continuity.
Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
Always put the stackable end of the test
lead into a terminal of the Product.
.com sales@GlobalTestSupply.com
3