Vcr/Dvd Punch-Through Feature; Tv/Vcr And Tv/Dvd Combo Units - Philips PH750 Owner's Manual

Advanced Button Functions
DVD Functions
SCAN+ and SCAN- buttons control the speed of Fast Forward and
Reverse Playback respectively.
CHAPTER+ and CHAPTER- buttons respectively locate the
succeeding or preceding Chapters or Tracks on a disc.
SUBTITLE button turns the subtitles on or off.
REPEAT button performs DVD players "A-B Repeat" (or RPT A.B)
function for repeat play of current Chapter or Track.
INFO/SELECT button brings up DVD Display or Control Menu for
Chapter/Track/Title number, Time remaining/elapsed indication,
system information, etc.
MENU brings up the DVD disc Menu screen - use with the UP,
DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection. Note some DVD
players require the PLAY button to be used.
QUIT button is used to Exit or Clear on-screen Menu displays.
PLAY button is used to start Disc playback and for Menu selection
on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY to resume.
INPUT button activates the DVD Player's SETUP Menu.
SAT Functions
GUIDE button displays on-screen Satellite Channel Guide.
CHAPTER+ and CHAPTER- buttons perform the "Page+" and
"Page-" function for on-screen Guide Menus used by some
Satellite systems.
INFO/SELECT button brings up Satellite Display screen for
current Channel and system information.
MENU brings up the Satellite Menu screen - use with the UP,
DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection.
QUIT button is used to Exit or Clear on-screen Menu displays.
INPUT button performs the Satellite TV/SAT function.
8
Advanced Functions, cont.

VCR/DVD Punch-Through Feature

This remote lets you Punch-through to the last VCR or DVD device
used. Normally other types of remotes only punch-through (from
another Mode) on the 6 VCR buttons, to the device programmed
under the VCR Mode button. This is not much use if you are using
a DVD programmed under a Mode other than VCR. This remote
punches-through to the last VCR or DVD device you used. For
example, if you have 3 DVD/VCR devices programmed into this
remote, the last one you accessed on the remote will be the one
that has control of the 6 VCR/DVD buttons when in any other
mode.
TV/VCR/INPUT
When in TV mode the TV/VCR/INPUT button performs the
INPUT source switch function.
When in a mode that has been programmed for VCR the TV/VCR/
INPUT button performs the TV/VCR antenna switch function.
When in a mode that has been programmed for Cable the TV/VCR/
INPUT button performs the A.B switch function.
When in a mode that has been programmed for SAT the TV/VCR/
INPUT button performs the TV/SAT switch function.
When in a mode that has been programmed for DVD the TV/VCR/
INPUT button performs the DVD Setup function.

TV/VCR and TV/DVD Combo units

Note that for some TV/VCR and TV/DVD combo units you might
need to set up two different buttons to control both parts of the
combo unit. E.G., (referring to the Direct Code Entry section on the
following page) you might need to set up a code under the TV
button to control the TV part of the combo unit AND a separate
code for the VCR or DVD under any other button you choose.
Misc.
SELECT means same as OKAY - some manufacturers use OKAY
label and others use SELECT label on their remotes.
CC will activate the Closed Caption feature if your device has that
feature.
PIP (Picture-in-Picture) and TOGGLE buttons operate your
television's Picture-in-Picture features. Use PIP to activate the
feature and TOGGLE to swap between the displayed pictures on
your TV.
9