Philips HTS8000S User Manual page 21

7
Select { Progressive } > { On }, then
press OK to confirm.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
Component
8
The below menu will appear on the TV.
9
Press 1 to highlight
and press OK to confirm.
There will be no picture on your TV
at this state until you turn on the
progressive scan mode on your TV.
0
Turn on your TV progressive scan mode
(refer to your TV user manual).
➜
The below menu will appear on the TV.
!
Press 1 to highlight
and press OK to confirm.
➜
The set up is complete now and you
can start enjoy the high quality picture.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP MENU.
001-049 HTS8000S-00-Eng
Getting Started
G
1
2
On
3
Off
in the menu
in the menu
21
If no picture:
Wait for 15 seconds for the auto recovery.
OR
Deactivate Progressive Scan feature by
pressing the EJECT on the DVD system.
Press 1 on the remote.
Press SUBTITLE on the remote.
➜
The blue DVD background screen will
appear on the TV.
Helpful Hint:
– There are some progressive scan TV and
High-Definition TV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the
progressive scan feature on both the DVD
system and your TV set.
22/04/2005, 04:05 PM
(continued)
21
3139 115 2xxx1