Uconnect 8.4/8.4 Nav Voice Recognition Quick Tips - Chrysler 300 2017 User Manual

E L E C T R O N I C S
UCONNECT 8.4/8.4 NAV VOICE RECOGNITION
QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice
Commands and tips you need to know to control your Uconnect system.
If you see the NAV icon on the bottom bar, or in the Apps menus, of your touchscreen, you have
the Uconnect 8.4 NAV system. If not, you have a Uconnect 8.4 system.
Get Started
All you need to control your Uconnect system with your voice are the buttons on your steering
wheel.
1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone
pairing instructions.
2. Reduce background noise. Wind noise and passenger conversations are examples of noise
that may impact recognition.
3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is
located in the headliner and aimed at the driver.
4. Each time you give a Voice Command, you must first push either the VR or Phone button,
wait until after the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts by pushing the VR or Phone button
and saying a Voice Command from current category.
Uconnect Phone Button
ate, answer, or end a phone call.
Uconnect Voice Recognition Button
1. Short Press: Push and release the VR but-
ton to begin Radio, Climate, Navigation,
and other embedded functions. After you
hear the single beep, say a command.
2. Long Press: Push and hold continuously
for a few seconds, then release the VR
button for Siri functions. After you hear the
familiar Siri "double beep," say a command.
Phone Hang Up Button, Push to end a call.
130
, Push to initi-
.
1 — Uconnect Phone Button
2 — Uconnect Voice Recognition Button
3 — Phone Hang Up Button
Uconnect VR And Phone Buttons