Staying Safe - Zte MF730M Quick Manual

5. Firmly plug the USB connector into your computer's USB port.
The computer operating system will automatically recognise the new hardware. Depending on
the make and operating system of your PC, you will be taken to the operator's landing page
or the device administration page (if the device doesn't connect). The LED indicator lights
(see above) will show the connectivity status during the start up process.
6.
Settings – Accessing the Web User Interface (UI).
From the Home page of the Web UI you can access the main settings for: Statistics, Messages,
Updates, Settings and to check the device status. You can access the URL (http://m.home or
http://192.168.0.1 )via your web browser.
You should never need to change the settings; this is recommended for advanced users only.
Disconnect from the Network - To disconnect from the network, just remove the dongle from the
PC directly.

Staying safe

• Some electronic devices – like vehicle systems – are susceptible to electromagnetic
interference from modems. If you are concerned, please consult the device
manufacturer before using your modem.
• Modems can interfere with medical devices, such as hearing aids and pacemakers.
Please consult a doctor or the manufacturer of the device before using yours. And
always keep it more than 20cm away from medical devices.
• Always turn off your modem in potentially explosive environments, such chemical
factories, unless you have been told by a qualified professional that it is safe to use.
• The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations
and in some hospitals. Please observe and obey all warning signs and switch off your
modem when requested.
Please keep your modem out of the reach of children. It's not a toy and could cause
•
Confidential and Proprietary Information of ZTE CORPORATION 3