Model No: WR254
Rear Panel
Connect the supplied power adapter here.
Power port
10/100BaseT
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
LAN port
If required, any port can be connected to another hub. Any LAN port
will automatically function as an "Uplink" port when necessary.
Internet port
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
(10/100BaseT)
Reset Button
This button has two (2) functions:
•
•
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED
4. Release the Reset Button. The Wireless Router is now using the
Figure 2: Rear Panel
Reboot. When pressed and released, the Wireless Router will
reboot (restart).
Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
LED has flashed TWICE.
factory default values.
6