Omron NJ-series User Manual page 644

Uploading the Project
Use the following procedure to upload the project.
1
Start the Sysmac Studio on the computer that is connected to the NJ-series Controller.
2
Click the New Project Button and create a new project.
3
Select the device and version of the CPU Unit to replace.
4
Click the Online Button in the toolbar.
5
Click the Synchronize Button in the toolbar.
6
Click the Transfer From Controller Button.
The project in the Controller is uploaded to the computer.
7
Click the Recompare Button.
The uploaded project is compared to the project in the Controller.
8
Click the Save Button.
The project is saved in the computer.
NJ-series CPU Unit Software User's Manual (W501)
Appendices
A-117