Specification - LG 42LD460B/H Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LJ01Z chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature
: 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
4. General Specification(TV)
No Item
1 Receivable System
2 Available Channel
3 Input Voltage
4 Market
5 Screen Size
6 Aspect Ratio
7 Tuning System
8 LCD Module
9 Operating Environment
10 Storage Environment
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes

SPECIFICATION

Specification
1) SBTVD / NTSC / PAL-M / PAL-N
VHF : 02 ~ 13
UHF : 14 ~ 69
DTV : 07 ~ 69
CATV : 01 ~ 135
1) AC 100 ~ 240V 50/60Hz
Central and South AMERICA
32 inch Wide (1920 x 1080)
42 inch Wide (1920 x 1080)
16:9
FS
LC320WUG-SCA1
LC320WUN-SCA2
LC420WUG-SCA1
Temp : 0 ~ 40 deg
Humidity : ~ 80 %
Temp : -20 ~ 60 deg
Humidity : -85 %
- 6 -
Remark
32LD460H-SA
42LD460H-SA
LGD 32LD460H-SA
LGD 42LD460H-SA
LGE Internal Use Only