Motorola FX-850P User Manual page 63

Your correspondent cannot reach you
Is your phone switched on ( pressed for more than one second)?
Are you accessing the right cellular network?
You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
Have you switched off the microphone (appears)?
Are you holding the phone close enough to your mouth? The microphone is located in
the bottom center of the phone.
The phone starts beeping and "** Warning ** Battery Low" flashes in the display
The battery is insufficiently charged. Replace the battery with a charged one and
recharge it or connect the battery charger.
The audio quality of the call is poor
Check the signal strength indicator in the display. The number of bars after it indicates
the signal quality.
Signal strength from strong to weak.
Try moving the phone slightly or moving closer to a window if you are in a building.
No number is dialed when you recall a phonebook entry
Check that the numbers have been stored correctly, by using the Phonebook Search
feature.
Re-store them, if necessary.
Access Codes
There are several access codes that are used by your phone and its SIM card. These
codes help you protect the phone against unauthorized use.
The access codes (except for the PUK codes) can be changed using the Security
Settings menu options.
Phone Password
The phone password can be set to avoid unauthorized use of the phone. The
password generally supplied with the phone is 0000. You are advised to change it
62