Lpcm Output; Night Mode - Turning On/Off - Philips MMS 430 User Manual

DVD Setup Menu Options

LPCM Output

If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
1
In 'AUDIO SETUP', press OK to enter
the submenu.
2
Press 3 4 to highlight {LPCM Output},
then press OK.
3
Press 3 4 to highlight one of the options
below:
48kHz
Playback a disc recorded at the sampling
rate of 48kHz.
96kHz
Playback a disc recorded at the sampling
rate of 96kHz that can only be achieved in
Stereo-Classic mode.
4
Select an item and press OK.
Helpful Hint:
– LPCM Output can be selected only when
PCM is activated.
To return to the previous menu, press
TIPS:
To remove the menu, press
24
01-30 xDV430_4

Night Mode - turning on/off

In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favourite action
movie without disturbing others at night.
1
In 'AUDIO SETUP', press OK to enter
the submenu.
2
Press 3 4 to highlight {Night Mode}, then
press OK.
3
Press 3 4 to highlight one of the options
below:
ON
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
OFF
Select this when you want to enjoy the
surround sound with its full dynamic
range.
4
Select an item and press OK.
OK
.
SYSTEM MENU
24
.
3139 246 14854
23/12/2004, 5:42 PM