Panasonic EY79A2 Service Manual page 9

4.5. Removing the Switch Assembly, LED Assembly and Battery Terminal.
Connecting and disconnecting the connector
4.6. Removing the Gear Box Block from the Module Assembly.
* Precautions when attaching the connectors
Holding the motor assembly, remove the entire motor mount-
ing plate, including the gear box block from the motor assem-
bly.
9
1. Remove the 2-pin connector.
2. Remove the 6-pin connector.
3. Pull the faston terminal directly
out from the switch assembly.
* Exercise care not to bend the ter-
minal fitting.
4. Remove the lead wires from the
battery terminal.