Powered Subwoofer Section; Removing The Power Amplifier Unit - JVC DD-8E Service Manual

3.2

Powered subwoofer section

3.2.1 Removing the Power amplifier unit

(See Fig.1 to 3)
(1) Remove the six screws A attaching the Power amplifier
unit. (See Fig.1)
(2) Remove the three screws B attaching the Power amplifier
unit. (See Fig.2)
(3) The Power amplifier unit is drawn out on the way, discon-
nect the connector wire from speaker unit connected to
connector CN301 of the AMP board assembly and then
take out the Power amplifier unit. (See Fig.3)
A
Fig.1
B
Fig.2
CN301
Fig.3
A
(No.MB563)1-21