Equipment To Connect To The Side Connections; Connect Peripheral Equipment - Philips 32PF9967D/10 Manual

24571.1 en.qxd 31-08-2005

Equipment to connect to the side connections

2
1
3

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
can handle CVBS, RGB and Audio L/R;
EXT1
CVBS,Y/C, RGB and Audio L/R;
EXT2
CVBS and Audio L/R;
EXT3
can handle VGA, SVGA, XGA and 480p, 576p, 720p, 1080i and 1152i
DVI
Side can handle CVBS, S-VIDEO and Audio L/R.
It is preferable to connect peripherals with RGB output to
Note: If your recorder is provided with the EasyLink function, it should be connected to
EasyLink functionality.
ANTENNA
EXT2
11:59 Pagina 29
Camera, Camcorder or Game
&
Connect your camera, camcorder or Game as shown.
é Connect to
VIDEO
equipment. For stereo equipment also connect
3.
AUDIO R
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
inputs 3.
AUDIO
Do not connect cable 1 and 2 at the same time. This may cause
picture distortion !
Headphone
Insert the plug into the headphone socket L as shown.
&
Press ¬ on the remote control to switch off the internal
é
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm jack.
In the Sound menu select
headphone volume.
EXT1
CENTRE AUDIO
EXT1 AUDIO
IN OUT
R
L
SUBW
2 and 3 for mono
AUDIO L
S-VIDEO
Headphone volume
or as RGB provides a better picture quality.
EXT2
to benefit from the
EXT2
DVI
EXT3
R
L
input 1 and
to adjust the
29