JVC AV-14AM Service Manual page 17

Measuring
Item
instrument
Signal
Adjustment
generator
of DELAY
POINT
Remote
(AGC) control unit
DELAY POINT
(AGC TAKE OVER)
NTSC 3.58
OTHER
VIDEO / CHROMA CIRCUIT ADJUSTMENT
The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values.
The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
Do not change the initial setting values of the setting items not listed in "ADJUSTMENT".
Colour system
Setting item
RED
1. CUT OFF
GREEN
BLUE
RED
2. DRIVE
BLUE
3. BRIGHT
4. CONT.
5. COLOUR
TV
6. TINT
VIDEO
7. SECAM BL ADJUST
TV
8. SHARP
VIDEO
(Do not adjust)
Test point Adjustment part
DELAY POINT
(AGC TAKE-OVER)
Initial setting value
48
43
PAL
+0
No. 56091
Description
1. Receive a black and white signal (colour off).
2. Select 1. IF from the SERVICE MENU.
3. Select 2. DELAY POINT by pressing the 2 key on the remote
control unit.
4. Adjust the MENU - or + key until video noise disappears.
5. Turn to other channels and make sure that there are no
irregularities.
Initial setting value
SECAM NTSC 3.58
-50
-50
-50
+0
+0
+0
+0
+0 +0
+0
+8
+0
-15
+5
AV-14AM
NTSC 4.43
+0
(+0)
(+0)
( ) : OFFSET Value
17