Connecting Other Equipment - Sanyo CPP2510 Instruction Manual

CONNECTING OTHER EQUIPMENT
Audio Monitor Out Connection
More powerful sound can be enjoyed by using your audio ap-
paratus.
Connect the audio signal source from audio-monitor-out ter-
minal to the line-in or aux terminal of the audio apparatus.
Connecting t o the AV2 Input Jack
Connect to the video and audio outputs of a VTR, video disc
player, etc. Tapes and discs can be played back.
All sound volume can be
controlled using the TV's re-
mote Control unit.
I
.
Use the TVIVIDEO
selector
O
to switch
to the AV2 position for
watching.
A& recording is alsopossi-
bie using this terminal.
W t h this connection method
vou can
eniov Surround
, - -
-~
sound using <he speakers of
vour audio apparatus and the
TV speakers.
j
Audio out
- -
A !
LINE IN or
To the amp's
-
a
AUX
e e
I I
p~
If the audio signal from the VCR is stereo, be sure to connect
the right and left channels to the respective right and left
Audio-in terminals.
If the external audio signal is a monaural one, connect it to the
left terminal of Audio-in. Then select the monaural mode and
the audio channel in the TV set with the remote control
StereolMono button
(D
or Bilingual A18 button
@.
Mini-component stereos, etc.
External Speaker Connection
S-VHS VCR Connections.
S-VHS VCR is designed with a highly advanced techniques.
So the visual quality of S-VHS VCR is better than the other
popular VHS VCR.
S-VHS VCR can be enjoyed by using S-terminal.
(REAR PANELI
I
Speaker selector
(Set to the "EXTERNAL' position
when external speakers are used.
This will
cut
the sound of the
[REAR PANELI
II
internal TV soeakers.1
Speaker
cabinet
(8 ohm, MAX. 5W1
1 8 ohm, MAX. 5W1
You can also enjoy Surround sound through connected ex-
ternal speakers.