Philips 51PP9910 User Manual page 19

A
17
DVANCED
S
ETTING THE
Y ou can set the Timer to switch to a
selected channel at a specific time
while you are watching another channel,
or when the TV is in standby mode. You
can also set the TV to turn off at some
time after the TV switches channels.
Press the MENU button on
1
the remote control to show
the onscreen menu.
Press the CURSOR
2
DOWN button twice to
highlight FEATURES.
Press the CURSOR RIGHT
3
button to enter the FEA-
TURES submenu. Then press
the CUROSR DOWN button
until TIMER is highlighted.
Press the CURSOR
4
RIGHT button again. Then
press the CURSOR DOWN
button once to highlight the
START TIME control.
Press the CURSOR RIGHT
5
button to highlight the time
indicator area.
Press the NUMBER but-
6
tons to enter the correct
time. If you make a mistake
entering the time, use the
CURSOR LEFT or RIGHT but-
ton to move among the time
input slots to make correc-
tions.
NOTE: You can also use
the CURSOR BUTTON UP
or DOWN to cycle through
digits to input the time.
Press the CURSOR UP or
7
DOWN button to select AM
or PM.
M F
ENU EATURES
T S /S
IMER TART TOP
PICTURE INTELLITUNE
SOUND SMART PICTURE
SLEEP
FEATURES
TIMER
INSTALL
Auto Lock
9
1
7
8
3,4,
2
5
6
Press the CURSOR LEFT
8
button repeatedly until START
TIME is highlighted. Then press
the CURSOR DOWN button
to highlight STOP TIME. If you
want the TV to switch off at
some time after the changing of
channels, follow steps 5–7 above
to set the STOP TIME.
Press the INFO/EXIT but-
9
ton to exit the menu.
See the next two panels for instruc-
tions on selecting the Timer's channel
and activating the timer.
T
IME
FEATURES
INTELLITUNE TIME
SMART PICTURE START TIME
SLEEP STOP TIME
CHANNEL
TIMER
ACTIVATE
Auto Lock
FEATURES
TIMER
TIME 8:06 PM
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
TIME
START TIME _ _:_ _
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
TIME
START TIME
STOP TIME _ _:_ _
CHANNEL
ACTIVATE