Brief Introduction Thank you for buying handheld digital two way radio DMR UA‐1000. The goal of UA‐1000 is to provide cost‐effective communication equipment for a variety of business sites and the amateur and supply all fast‐paced walks of life with perfect communication solutions. This product uses professional and commercial or amateur frequency, you need to apply for use to radio management institution of the provinces, cities or autonomous regions. please read this manual carefully in order to know how to properly operate the radio before use. Content Main Features‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐09 Unpacking and Checking Equipment‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐09 Preparation‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10 Getting Acquainted‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐14 Basic operations‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐15 Functions Instruction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐18 LED Indicator ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐19 Beeper ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐19 ...
Item Quantity Radio 1 Rubber Antenna 1 Li‐ion Battery Pack 1 Desktop Charger 1 Power Adapter 1 Belt Clip 1 User’s Manual 1 Hand‐Strap 1 Warranty Card 1 Preparation Charging the Battery Please use the battery charger designated by UAW to charge battery, and follow the steps : 1. Insert DC jack of power adapter into DC jack behind the charging kit. 2. Insert power adapter into AC power supply socket, now the charging red and green indicator lights, successfully connect the power supply. ...
Page 4
/discharge it two or three times, the operating capacity will increase to its normal capacity. After fully charge the battery ,please do not charge it again and should take it off from the charger. If not ,it will short or damage the battery life for over charge . Note : 1) The temperature for charging should be from 5 ℃to 40 ℃. Battery can not be over fully charged out of this temperature range .Please prepare a spare battery for the cooler weather and do not discard the defect battery .Because it may be used under the ...
Page 5
To install the battery into the battery positioning hole of radio bottom, then press the battery, make the button completely to lock battery. To remove the battery, please turn off the radio, and then push up the battery button of radio top, finally take off the battery. (Install the battery) (Remove the battery) ...
Installing Earphone /Programming Jack Uncover earphone lid, directly insert earphones into earphone holes (earphones need to be additionally purchased ) You can use computer programming software to operate(consult with local dealers about computer programming software ) Note: If your radio developed with VOX function ,you should re‐turn on radio power once to active VOX function. Getting Acquainted ...
Page 7
Note: Program Key 1/2 can be defined the following functions by short/long press. SK: Item Function 1 Unassigned 2 All Alert Tones On/Off 3 Emergency On 4 Emergency Off 5 High/Low Power 6 Monitor 7 One Touch Access 1 8 One Touch Access 2 9 One Touch Access 3 ...
10 One Touch Access 4 11 One Touch Access 5 12 One Touch Access 6 13 Repeater/Talk Around 14 Scanning ON/OFF 15 Tight/Normal SQ 16 Privacy On/Off 17 VOX ON/OFF 18 Zone Toggle 19 Battery Indicator 20 Lone Worker ON/OFF Basic operations Power On/Off Turn the power switch knob clockwise to turn on radio power; to turn it off ,turn the power switch knob counter‐clockwise. ...
Channel Selection Turn the channel switch to desired channel number ( 32 Channels) . Note: There are two zones ,16 channels for each zone for this radio . Zone 1 and Zone 2 are switchable by programming setting.(Details refer to “Zone Selection) TX Press PTT and face to microphone talking . Please make the distance between your lip and microphone at 3‐4 cm ,and talk as usual to get the best voice quality . RX Release PTT to receive information and adjust desired volume level to get good voice quality . Functions Instructions ●LED Indicator The LED indicator is to show the radio working status. Red light : radio is transmitting signal. Green light : radio is powering on or receiving non‐encrypted calling or message ,or detecting airing activity . ...
Page 10
3,When calling and radio enable the “Free Channel Indication” function ,then you release the PTT ,will get a short beeper tone . That means this is a free channel and wait for your answer . 4, When calling stop (eg ,receiving the emergency alarm) ,you will hear the free channel beeper . You can disable all using radios beeper tone and indication to turn off the free channel indication .(Tone/Beeper ON/OFF) 5,Switch rotator to change digital channel . ●Receiving and Making A Call Zone Selection ...
Page 11
First ,detecting radio before calling; Second, ready to make a call . The LED light green for the chosen radio .You only can program the using radio with one type Private Call Receiving a private calling : 1 LED light green . 2, Keep the radio 1‐2 feet (2.5‐5.0cm) away from mouth . If the radio program the “Free Channel Indication” ,release PTT to get a short tone ,that means it is free channel and wait for your answer . 3 ,Press PTT to answer ,LED light red . 4,Talk to microphone after active the tone of allowing calling tone . 5, Release PTT to receive information . 6, Automatically over the calling if there is no operation with permitted period . 7, Radio sound a short tone . Receiving All Call All call is transmitting information to all the radios. Especially for releasing special notice . When receiving : 1 Radio sound a tone and LED light green. 2, Radio automatically over the calling if there is no operation with permitted period. If the radio program the “Free Channel Indication” ...
Page 12
it is free channel and wait for your answer . Automatically over the calling if there is no operation with permitted period . Making Private Call 1 Rotate channel switch to desired channel from user ID . 2, Keep the radio 1‐2 feet (2.5‐5.0cm) away from mouth . If the radio program the “Free Channel Indication” ,release PTT to get a short tone ,that means it is free channel and wait for your answer . 3 ,Press PTT to answer ,LED light red . 4,Talk to microphone after active the tone of allowing calling tone . 5, Release PTT to receive information . 6, Radio automatically over the calling if there is no operation with permitted period. If the radio program the “Free Channel Indication” ,release PTT to get a short tone ,that means it is free channel and wait for your answer. Automatically over the calling if there is no operation with permitted period . 7, Radio sound a short tone . Making All Call Program the radio with this function and transmit information to all users . 1 Rotate channel switch to desired channel from contact ID . 2, Keep the radio 1‐2 feet (2.5‐5.0cm) away from mouth. If the radio program the “Free Channel Indication” ,release PTT to get a short tone ,that means it is free channel and wait for your answer . 3 ,Press PTT to answer ,LED light red . 4,Talk to microphone after active the tone of allowing calling tone . All the users on this channel can not answer the calling . Programmed Key to Make Group /Private Call ...
4,Talk to microphone after active the tone of allowing calling tone . 5, Release PTT to receive information . 6, Radio automatically over the calling if there is no operation with permitted period. If the radio program the “Free Channel Indication” ,release PTT to get a short tone ,that means it is free channel and wait for your answer. Automatically over the calling if there is no operation with permitted period . 7, Radio sound a short tone . Message ● Send Pre‐set Message You can at most pre‐set 50 pieces message . 1, Choose desired contact to send a pre‐set message . 2, LED light red . 3,Two tones of “DiDi” means sending message successfully .A lower tone means no message send . ●DTMF Decode/Encode This function is only available radio channel in analog mode. 1,You can program desired DTMF code for each channel. 2,Choose the desired sending DTMF code. ...
Programming radio this function is to protect radio users safety with lonely work . When enable this function and set the period ,radio will alarm the user before run of time .User should press this key to answer in “safety” state ,if not ,radio will goes into emergency alarm. Scan ● Scan List Creat the scan list and allocate to single channel/ contact list . Through cycle scanning the listed channel /contact list to search the any communication channel . It support at most 250 list and 16 members for each list . Scan LED light red when scanning . Two methods of scanning : 1 ) Main Channels ( by manual ) : Scan all channels/contact group from all scanning lists. When scanning ,your radio automatically start from the last scanned channel/contact list or starting scanning channel. 2 ) Automatically manual : Scanning start from the channel which be active automatically scanning . ...
6, Radio automatically over the calling if there is no operation with permitted period. Settings ■SQL You can adjust the SQL to filter lower signal calling or channels with background noise is higher than normal value . Normal :default value. High: filter no use calling or background noise ,but may also filter the calling from long distance . 1 ) Program the SQL key . 2 ) A positive tone means high SQL ; A negative tone means normal SQL . ■High/Low Power High power enable communication with long distance radio .Low power enable communication with short distance radio . 1 ) Program High/Low Power key . 2 ) A positive tone means radio transmit at the low power ; A negative tone means radio transmit at the high power . ■VOX This function enable your radio to make a call with a programmed channel .No matter when the accessories with VOX function detect the signal ,radio will transmit the information within programmed period . Press PTT to disable VOX function . ...
■Battery Capacity Checking LED light yellow : charging LED light green: fully charged. Press programmed key to check the battery capacity by the beeper . 1) Very low power : “Diling,Diling” Tone. 2) High: Three tones of “Diling Diling” 3) Middle: Two tones of “Diling Diling” 4) Low: One tone of “Diling Diling”. Troubleshooting Symptom Try This Battery power may have run out, please No power update battery or recharge it. Battery may not be properly installed, please take it off and re‐install. Battery lasts a short time after charge The battery life is over, please replace new battery. ...
General Specifications Model NO. DMR UA‐1000 Frequency Range 400‐480 MHz Channel 32 (2 ZONE) Channel Spacing 12.5kHz Battery Type Li‐ion, 1600mA Frequency stability ±1.5 ppm (-20°C, +60°C, +25°C Ref) ℃ ℃ Operating Temperature ‐20 +50 Antenna type SMA‐K Antenna Impendence 50Ω Audio Output Power ≤1000mW@16Ω Dimension(H*W*D) 132*62*38mm Weight 250g Transmitter Output Power 5W/1.5W Spurious and Harmonics ‐36dBm < 1GHz / ‐30dBm > 1GHz ...
Page 19
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 20
RF exposures decrease with increasing distance from the antenna. Use only supplied or replancement approved NANAN HONGDA ELECTRONIC EQUIPMENT CO.,LTD batteries, and accessories. Use of non-manufacturer-nameapproved antennas, antennas, and accessories may exceed the FCC RF exposure guidelines. batteries,...
Page 21
Warranty Card Contact :__________________________ Company Name:________________________________________________________________ ADD:_______________________ Post Code:_________________________ Tel:_______________________ ...