Kenwood TK-2102 Instruction Manual page 8

Plug the AC adaptor into an AC outlet.
After charging the supplied KNB-15A battery pack
for 8 hours, remove it or the transceiver equipped
with it from the charger.
• The charger does not turn OFF automatically after
charging is completed.
Unplug the AC adaptor from the AC outlet.
Note: It takes approximately 6 hours to fully charge the optional
KNB-14 battery pack.
4
Plug the AC adaptor cable into
the adaptor jack located on the
rear of the charger.
Slide the NiCd battery pack or
transceiver with a NiCd battery
pack into the charger.
• Make sure the battery pack
contacts are in contact with the
charging terminals.
• The charger LED lights and
charging begins.