Boiler Mounting - Viessmann Vitodens 100-W B1HA 26Vitodens 100-W B1HA 35Vitodens 100-W B1KA 35 Installation And Service Instructions Manual

Vitodens 100-W, B1HA series & B1KA Combi Installation/Service

Boiler Mounting

Boiler installation
The Vitodens 100-W boiler can be wall-mounted on:
- a brick/concrete wall
- wood studs
- metal studs
- boiler stand
Mounting Vitodens 100-W boiler
Legend
A Boiler mounting
Following are the installation instructions for the mounting
bracket on each material. Skip to the installation
instructions applicable to your installation requirements.
Installation of mounting bracket on brick/concrete wall:
1. Drill holes [Ø e in. (10 mm)].
2. Align wall mounting boiler bracket and attach to wall
with the screws and plastic anchors supplied.
CAUTION
Whichever mounting method is used, ensure that
the boiler bracket is tightly and securely fastened to
wall. Failure to secure the boiler properly could cause
loosening, posing a severe safety hazard.
Dimensions
13