3
Replace the M1.6x4 (2) screws to secure the docking board to the tablet.
4
Connect the docking board cable to the connector on the system board.
5
Install the:
a
battery
b
display panel
c
microSIM card
and
6
Follow the procedure in
Thunderbolt over Type-C USB bracket
Removing the thunderbolt over Type-C bracket
1
Follow the procedure in
2
Remove the:
a
microSIM card
and
b
display panel
c
battery
3
To release the thunderbolt over Type-C bracket:
a
Remove the M2x2.0 (3) screws securing the thunderbolt over Type-C bracket to the tablet [1].
b Slide and lift the thunderbolt over Type-C bracket from the tablet [2].
36
Removing and Installing components
microSD card
After working inside your
tablet.
Before working inside your
microSD card
tablet.