Cleaning And Care; Cleaning The Wash Cabinet; Cleaning The Door And The Door Seal; Cleaning The Control Panel - Miele G 6993 Operating Instructions Manual

Check your dishwasher regularly
(approx. every 4 - 6 months). This
way faults and problems can be
avoided.

The external surfaces of the
dishwasher are susceptible to
scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
external surfaces.

Cleaning the wash cabinet

The wash cabinet is largely self-
cleaning, provided that the correct
amount of detergent is always used.
If, however, there are limescale or
grease deposits in the cabinet, these
can be removed with a special cleaning
agent (available from Miele). Follow the
instructions on the packaging.
If you mainly use low temperature
programmes (below 50 °C), there is a
risk of bacteria and unpleasant odours
building up in the wash cabinet. To
prevent this happening the dishwasher
will automatically increase the
temperature in the final rinse of the
selected programme after several
programmes using low temperatures
have been run.
 Clean the filters in the wash cabinet
regularly.

Cleaning and care

Cleaning the door and the door
seal
Mould could build up on the door seal
and the sides of the dishwasher door as
these surfaces are outside the wash
cabinet and so not accessed and
cleaned by the spray arm jets.
 Wipe the door seal regularly with a
damp cloth to remove food deposits.
 Wipe off any food or drink residues
which may have dripped onto the
sides of dishwasher door before
closing it.

Cleaning the control panel

 The control panel should only be
wiped with a damp cloth.

Cleaning the reflector panel

The reflector panel for the In-operation
indicator light is situated in the
coverplate underneath the worktop.
 The reflector panel should only be
wiped with a damp cloth or a suitable
cleaning agent designed for use on
plastic.
63