Pyle PSTM50 User Manual

Steam floor mop & sweeper

Advertisement

Quick Links

PSTM50
Steam Floor Mop & Sweeper

Advertisement

Table of Contents
loading

Summary of Contents for Pyle PSTM50

  • Page 1 PSTM50 Steam Floor Mop & Sweeper...
  • Page 2 Basic precautions should be used when using an electrical appliance, including the following listed warnings. READ ALL INSTRUCTIONS BEFORE USING YOUR PSTM50 STEAM MOP & SWEEPER. Intended use This device is suitable for cleaning heat-resistant surfaces. It is also suitable for cleaning laminate flooring if you following the instructions below: 1.
  • Page 3 Electricity-risk of electric shocks / risk of fire! Never immerse the device in water or other liquids to avoid the risk of electric shock. Do not use the device if it falls in water. Do not touch the device with wet hands. Do not operate it outdoors or in rooms with high humidity.
  • Page 4 Always use the floor cloth and check it for signs of wear each time you use it. Do not use it if it shows any signs of wear or if it is damaged! It could damage your flooring! Use only the accessories included in the scope of supply or recommended by the manufacturer.
  • Page 5: Device Overview

    Device Overview Steam release button Cable mount Top handle Water tank Water filter Central piece Carpet glider Floor cloth Lower hook for cable reel 10. Mains cable 11. Upper hook for cable reel 12. Control lamp 13. On/Off switch for the rotating brush 14.
  • Page 6 B. Assembly 1. Place the central piece (6) onto the cleaning foot (14). 2. Screw the two parts together on the back using the screw which is also supplied. 3. Insert the water tank (4) into the central piece and press it down until it engages audibly.
  • Page 7 1. If not pre-fitted, attach one of the floor cloths supplied (8) to the bottom of the cleaning foot using the Velcro fasteners. 2. If the water tank (4) is inserted in the device, remove the water tank by pulling it in A vertical direction, up and away from the appliance, as show in the illustrations.
  • Page 8 ! Never clean the same spot for longer than 10 seconds. ! Never direct the steam at people, animals, or items containing electrical components (e.g. inside ovens, fridges, at switches and lights, microwave ovens etc.). ! Never touch the bottom of the device during operation! ! While the device is in operation, the cleaning foot must not be held at a slanted angle or be inverted as hot spray water may emerge! ! After use the floor cloth may still be very hot.
  • Page 9: After Use

    8. Let all of the parts of the device dry completely before you put it away. Technical data Model: PSTM50 Device: Pure Clean Steam Floor Mop & Sweeper Voltage supply: 120, 60 Hz Output: 1500 W Capacity of the water tank: max.
  • Page 10: Troubleshooting

    Troubleshooting If the device should stop working properly, first check whether you are able to correct the problem yourself. If you are not, contact the Customer Service (1-888-318-PYLE / 718-535-1800). Do not try to repair a faulty device yourself! NOTE: If you use normal tap water in the Pure Clean Steam Floor Mop &...
  • Page 11: Limited Warranty Policy

    Limited Warranty Policy All Pyle products are carefully constructed and thoroughly tested before shipment. Products purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retail purchaser.
  • Page 12 We want you listening for a lifetime Introducing Pyle Rewards! Get points for registering your Pyle product, posting text or video reviews online Redeem your points for cool items like Pyle-branded t-shirts, pens, and Pyle products, including mini speakers, sports watches, guitar pedals, iPod clock...

Table of Contents