Phone Password & Admin Password; Center Access Code (Network Password); Pin Code; Usim Password - Samsung SOFTBANK Getting Started

Phone Password & Admin Password
Phone Password and Admin Password are four-digit
numbers (Default: 9999). Phone Password is required
to operate/change some handset functions.
Admin Password is required for Reset Settings, Reset
All, Proxy Setting, etc.
・ Entered Phone Password and Admin Password
digits appear as *.
・ If incorrect, an error message appears. Try again.
・ Phone Password and Admin Password can be
changed on handset (fP.11-3).

Center Access Code (Network Password)

Four-digit number specified at subscription; required
for changing service subscriptions, for activating
optional services, or for operating handset from
landlines.

PIN Code

USIM Card features two security codes: PIN and
PIN2.
PIN Code
Use PIN (four- to eight-digit) to prevent unauthorized
use of handset by others.
・ Modify PIN (fP.11-3).
・ When PIN certification is activated, PIN entry
is required each time handset is turned on or
whenever USIM Card is re-inserted (fP.11-4).
PIN2 Code
PIN2 (four- to eight-digit) is required for resetting
Call time & cost.
・ Modify PIN2 (fP.11-3).
Canceling PIN Lock (PUK/PUK2 Code)
Incorrectly entering PIN or PIN2 three consecutive
times activates PIN Lock limiting function access.
Enter PUK (PIN Unlocking Key) Code to cancel PIN
Lock.
For more information, contact SoftBank Mobile
Customer Center, General Information (fP.15-31).
Note
・ Entering PUK or PUK2 incorrectly ten
consecutive times activates PUK Lock,
disabling handset. Note PUK and PUK2.
・ PUK Lock cannot be canceled. Contact
SoftBank Mobile Customer Center, General
Information (fP.15-31).

USIM Password

Use this code to authenticate a USIM Card. If USIM
Password matches, USIM Card is valid. Set USIM
lock to On to set USIM Password.

Advanced Settings

My Details

Editing My Details
→ My details →
Tap Phone Tap Edit
Creating New Entries )
b
Sending My Details
→ My details →
Tap Phone Tap Send
■
To Send via Message
Via message →
(fP.4-4 S! Mail
■ ®
To Send via Bluetooth
Via Bluetooth →
(fP.13-7 Sending One Item at a
Time )
b
■
To Send via Infrared
Via infrared (fP.13-5)
■
To Send via IC Transmission
Via IC transmission (fP.13-9)
Resetting My Details
→ →
My details
Tap Phone Tap More
→ →
Reset Yes
・ My Details except phone number are cleared.
Save in Data Folder
→ My details →
Tap Phone Tap More
→ →
Save to Data Folder Phone/Memory
card → Yes
・ To save to Memory card, insert Memory Card.
1
→
(fP.2-15
)
b
1-15