Disassembly And Reassemble; Disassembly - Samsung SyncMaster 2032BW Service Manual

Tft-lcd monitor chassis lpe20bs; lpe22bs
Hide thumbs Also See for SyncMaster 2032BW:
Table of Contents

Advertisement

3. Disassembly and Reassemble

This section of the service manual describes the disassembly and reassembly procedures for the LS57BPP LCD monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components.

3-1. Disassembly

Cautions: 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description
1. Place a soft cloth on the floor and place the
monitor on it so that the front of the monitor is on
the cloth. Lean the top of the stand backwards
until it is at an angle of 5° to 10° and hold and
push the top of the monitor downwards.
Caution: If you try to forcefully remove the monitor
without leaning the stand backwards, the
connecting pin may break. Be careful.
Fragile: Do not break
2. Turn the monitor so the front section is facing
upwards. Remove the marked parts from the
front cover, as shown in the figure below.
3. Remove the marked part from the top edge of
the front cover, as shown in the figure below.
4. Remove the marked parts from both sides of the
front cover, as shown in the figure below.
3. Disassembly and Reassemble
Picture Description
5° to 10°
Screws
3-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Syncmaster 2232bw

Table of Contents