Loading And Unloading An Sd Card (With Navigation Function); Loading An Sd Card - Subaru STARLINK Manual

BASIC INFORMATION BEFORE OPERATION
LOADING AND UNLOADING AN
SD CARD (WITH NAVIGATION
FUNCTION)

LOADING AN SD CARD

CAUTION
l Position the SD card with the "▲" mark at the far end and
insert it until it clicks into place. When contact is made with the
stopper inside, the card cannot be inserted any further. Do not
try to forcibly push the card.
l Do not insert anything other than an SD card into the slot.
l Do not pull the SD card slot cover with force. By doing so, the
SD card slot cover may come off, or be damaged. If the SD
card slot cover comes off, it can be reattached by inserting the
cover clip into the hole.
l Avoid touching the SD
contamination. Doing so may cause card read failure.
42
card terminals to prevent
1.
Turn the ignition switch to the "OFF" position.
2.
Open the SD card slot cover.
3.
Insert the SD card.
● Make sure that the SD card is fully inserted.