Powering Your Remote Control - Philips PET100 User Manual

Remote Control
SET UP: setup enter or exit the system menu
DVD MENU: return to the DVD menu
Navigation key: Up/down/left/right
OK: Confirm a selection
OSD: view the playback status
Title: Return to the Title menu of DVD disc
Previous/ Next: Skip to previous or next
chapter track
Play/Pause: Start interrupt playback
Mute: cut the sound out
Stop: Stop playback or erase a program
Number Keypad (0‐9): input the password
or select the track
Subtitle: select the subtitle language for
DVD disc
Audio: select the audio language for DVD
disc
Return: return to the PBC menu for VCD disc
A‐B: repeat playback
Zoom: zoom in or zoom out the picture
Preparation:
Connect AC adaptor
Connect the supplied adaptor to the set and the main power supply
Connect to TV
You should connect the player to a TV and enjoy your DVD.
If the picture can't display normally . please try to change the TV system under the TV
Type menu
Powering your remote control
1 Open the battery compartment. Remove the protective plastic tab (first time users
only).
2 Insert 1 x lithium 3V battery, type CR2025, then close the compartment.
CAUTION
• Batteries contain chemical substances, so they should be disposed of properly.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
• Incorrect use of batteries can cause electrolyte leakage and will corrode the
compartment or cause the batteries to burst.
• Remove the batteries if the set is not to be used for a long time.
•
Per‐chlorate
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Setup
Press SETUP.
List of features is shown.
Use Left/Right to highlight your selection.
Use the navigation keys to highlight your desired setting
The SETUP menu includes:
General
TV display: Set screen display aspect ratio
OSD Lang: Language Set On Screen Display (OSD) languages
PBC: ON/OFF.
Screen Saver: ON/OFF.
Material – special handling may apply.
Audio
Dobly (Downmix) : LT/RT
See
Stereo
Set the digital output format
Video
Sharpness: It allows you to adjust the color of the screen
Brightness: It allows you to adjust the brightness of the screen
Contrast: It allows you to adjust the contrast of the screen
Preference
2