Information Before You Start; Starting / Stopping The Engine - Stihl MS 191 T Instruction Manual

English / USA
Chain brake maintenance
The chain brake is subject to normal
wear and tear. It must therefore be
checked and serviced regularly by
trained personnel (e.g. STIHL dealer) at
the following intervals:
Full-time professional every 3
usage: months
Semi-professional every 6
usage: months
28
Information
Before You Start
STOP
0
The four positions of the
Master Control lever
$ = Engine off –
ignition is switched off.
# = Normal run position –
engine runs or can fire.
To move the Master Control lever from #
n l
to or , press down the throttle
trigger interlock and squeeze throttle
trigger at the same time.
n
=Warm start – this position is used to
start a warm engine. The Master
Control lever moves to the normal
run position as soon as the throttle
trigger is squeezed.
l
=Cold start – this position is used to
start a cold engine.
Starting / Stopping
the Engine
4
2
3
Observe safety precautions – see
chapter "Safety Precautions".
: Push hand guard (1) forward:
The chain is now locked.
:
Press down trigger interlock (2) and
squeeze throttle trigger (3) at the
same time – hold them in that
position.
:
Set Master Control lever (4) to n
and also hold in that position.
:
Now release the throttle trigger,
Master Control lever and throttle
interlock in that order. This is the
starting throttle position.
1
MS 191 T