JBL EON ONE PA User Manual page 18

Treble
Reverb Level
Reverb On/Off
Channel Volumes
Mic/Line Buttons
XLR- 1/4" Combo Inputs
Power Receptacle
POWER IT ON
1. Confirm the
OFF position.
2. Connect the supplied power cord to the
Power Receptacle (H)
speaker.
3. Connect the power cord to an available
power outlet.
4. Flip on the
LED (I) and the Power LED on the front of
the speaker will illuminate.
Please visit jblpro.com/eonone for complete documentation.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA
A
Bass
B
C
D
E
F
G
H
Power Switch (S) is in the
on the rear of the
Power Switch (S); the Power
TOP
BACK
PLUG IN THE INPUTS
1. Turn the
and Master Volume Control (L)
way to the left before connecting any
inputs.
2. Connect your device(s) via the input jacks
provided and/or Bluetooth.
3. If CH1 or CH2 input is being used, select
MIC or LINE via
SET OUTPUT LEVEL
1. Set the level for the inputs using the
Channel Volume Controls (E)
starting point is to set the pot(s) at 12
o'clock.
2. Slowly turn the
(L) to the right until the desired volume is
reached.
© 2016 Harman International Industries, Incorporated
I Power LED
Limit LED
J
Bluetooth LED
K
Master Volume
L
Bluetooth Pair Button
M
Monitor Out Volume
N
RCA Monitor Outputs
O
Stereo 1/8" Line Input
P
Stereo RCA Line Inputs
Q
Stereo 1/4" Line Inputs
R
Power Switch
S
Channel Volume Controls (E)
all the
Mic/Line Button (F).
. A good
Master Volume Control