Table of Contents
Advertisement
4.
Place a 2.5-inch HDD into the drive
tray.
Ensure that the four screw holes of
the HDD match the screw holes on
the drive tray.
5.
Secure the drive tray with four screws
(2 screws on each side).
6.
Carefully insert the 2.5-inch SATA/
SAS drive tray and push it all the
way to the depth of the bay. Lock the
secure lock to secure the drive tray in
place.
7.
Repeat step 1 to 6 to install other 2.5-
inch SATA/SAS drives.
2-14
Drive tray screw hole
Drive tray with a 2.5-inch
SATA HDD installed
Chapter 2: Hardware Information
HDD
HDD screw hole
Advertisement
Chapters
Table of Contents
