Table of Contents
Advertisement
Starting
your washer
Before starting
your washer:
1. Measure
and add detergent
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD
SIZE
Select WATER
2.
TEMPERATURES
l
Turn the knob to point at a setting
l
Match the wash water temperature
that describes
the size of load you
to the type of fabrics
and soils being
wont to wash.
washed.
l
Set the knob on or between
EX
SMALL [a few items) and LARGE
(a full load).
l
All rinses are cold.
NOTE: Use the LARGE water
level
for best permanent
press resufts.
LOAD
SIZES AND WATER LEVELS
For best cleaning
results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing
of load items.
CAUTION
:
DO NOT
OVERLOAD WASHER.
'Approximate
fill with load.
LARGE (17.3 gals./655
L)'
MED (13.4 gaW50.8
L)'
EX SMALL (9.5 galsJ36.0
L)'
4
Advertisement
Table of Contents
