Table of Contents
Advertisement
A
Exiting Remote Control Mode
Remote control is cancelled automatically if no photograph is taken
before the time selected for Custom Setting c5 (Remote on duration
(ML-L3), 0 263), Off is selected for Remote control mode (ML-L3), a
two-button reset is performed (0 206), or shooting options are reset
using Reset photo shooting menu (0 252).
D
Assign Shutter Button
If Record movies is selected for Custom Setting g1 (Custom control
assignment) > Shutter-release button, the ML-L3 can not be used
when the live view selector is rotated to 1.
A
Cover the Viewfinder
To prevent light entering via the viewfinder from appearing in
photographs or interfering with exposure, remove the rubber eyecup
and cover the viewfinder with the supplied eyepiece cap (0 90).
A
See Also
For information on:
• Choosing the length of time the camera will remain in stand-by
mode waiting for a signal from the remote control, see A > Custom
Setting c5 (Remote on duration (ML-L3); 0 263).
• The beep that sounds when the remote control is used, see B > Beep
options (0 271).
178
Advertisement
Table of Contents
