Starting A Programme - AEG LAVATHERM 76280AC User Manual

12 www.aeg.com
When the function is activated the LED
above the push button or symbol on the
display comes into view.
8.7 The Dry Plus function
This function helps achieve dryer laun-
dry. There are 3 possible selections:
- the default selection which is rela-
ted to the programme.
— to get light dryness of laundry
— choose this selection to get max-
imum dryness of clothes.
8.8 The Delicate function
To dry more lightly, delicate and tem-
perature sensitive textiles (e.g. acrylic,
viscose). For fabrics with the symbol
on the fabric label. Programme operates
with decreased heat.
8.9 The Anticrease function
Extends anticrease phase (30 minutes) at
the end of the drying cycle to 90 mi-
nutes. This function prevents laundry
from creases. Laundry can be removed
during the anticrease phase.
8.10 The Buzzer function
When the buzzer function is activated
you can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
8.11 The Time Drying function
Operates only with the Time pro-
gramme. Lets the user set specific drying
programs from 10 minutes to 2 hours in
10 minute incremental steps.
8.12 The Delay Start function
Allows the delay of drying pro-
grams from a minimum of 30 mi-
nutes to a maximum of 20 hours.
1. Set the drying programme and func-
tions.
2. Push the Dealy start button repea-
tadly until the required time is shown
on the display (e.g.
gramme has to start after 12 hours.)
3. To activate the Delay start function,
push the Start/Pause button. The
time to start decreases on the dis-
play.
8.13 Child lock function
The child lock can be set to prevent chil-
dren accidently setting a program. The
child lock function locks all push buttons
and the programme dial (this function
does not lock On/Off button). To acti-
vate the child lock function push the Dry
Plus and Delicate buttons at the same
time until the symbol
on the display. To deactivate push again
the above buttons until the symbol goes
out of view.
You can activate the child lock function:
• before you push the Start/Pause but-
ton - the appliance cannot start
• after you push the Start/Pause button
- all the push buttons and the pro-
gramme dial are deactivated

8.14 Starting a programme

To activate the programme push the
Start/Pause button. The LED above the
push button changes the colour to red.
8.15 Change a programme
To change a programme, push the On/
Off button to deactivate appliance. Push
if the pro-
comes into view