Accessories - GE AKTApure User Manual

2 The ÄKTA pure instrument

2.6 Accessories

2.6 Accessories

Introduction
This section describes the holders and other available accessories. These are used to attach and organize
columns, tubing and bottles to the ÄKTA pure instrument. The holders are attached to the instrument
using the holder rails on the left side and the front of the instrument.
Rail extension
The Rail extension rod can be used to attach accessories, eg., column holders or a Multi-purpose
holder. The rod has extra rails on both sides. Push the button of the rod to attach it to a holder rail.
The illustration below shows the Rail extension rod.
1
Multi-purpose holder
The Multi-purpose holder can be used to attach accessories, eg., a Loop holder or a cassette. Attach
the holder to a holder rail.
The illustration below shows the Multi-purpose holder.
3
80
2
1 2
4 3
Part Function
1 Button
2 Extension rod
Part Function
1 Attachment point for accessories
2 Snap-in to holder rails
3 Attachment points for tubing hold-
ers
4 Tab
ÄKTA pure User Manual 29119969 AB