3 CONFIGURATION
3.1 Configuring Serial Communications
1) Access the Configuration Level as detailed in Section 4.1.2 of the User Guide (IM/SM3000)
2) Configure the instrument as described below:
4
Set according to the number of transmission wires
connected to the instrument: 4-wire, 2-wire.
Set the Baud rate used by the host system: 1200, 2400,
4800, 9600, 19200, 38400, 115200.
Set the Parity used by the host system: None, Odd, Even.
Set a unique Modbus Address that allows the host system to
identify the instrument on a Modbus link.
Note. Maximum 31 slaves per loop.