Connecting A Mobile Device To The Unit Directly (Wireless Direct) - Yamaha NP-S303 Owner's Manual

Connecting a mobile device to the unit directly (Wireless Direct)

The Wireless Direct connection enables you to use this unit as a
MUTE MUTE DIMMER DIMMER
wireless network access point, to which you can connect your
mobile devices directly.
PRESET
PRESET
1 1 2 2 3 3
• Wireless Direct supports the following functions:
4 4 5 5 6 6
– Operating the unit from a MusicCast CONTROLLER app installed on your
7 7 8 8 9 9
– Playing music files via AirPlay
10 10 MEMORY MEMORY HOME HOME
– Playing music files stored on Android devices using MusicCast
REPEAT REPEAT SHUFFLE SHUFFLE NOW PLAYING NOW PLAYING
1
NET NET USB USB BLUETOOTH BLUETOOTH
2
Cursor keys
ENTER
ENTER
SETUP RETURN
3
RETURN
DISPLAY DISPLAY OPTION OPTION
SETUP
4
AMP AMP
INPUT INPUT VOLUME VOLUME
MUTE MUTE
5
6
NOTE
mobile device
CONTROLLER app.
Press SETUP.
Use the cursor keys (/) to select "Network", and
then press ENTER.
NOTE
• To return to the previous screen, press RETURN.
Use the cursor keys (/) to select "Connection",
and then press ENTER.
Use the cursor keys (/) to select "W.Direct", and
then press ENTER.
W.DIRECT
¡SSID
Press ENTER to view the SSID for this unit, and then
press RETURN.
You will need the SSID in Step 11 to configure the Wi-Fi
settings for your mobile device.
Use the cursor keys (/) to select "Security", and
then press ENTER.
7
Use the cursor keys (/) to select the desired
encryption method, and then press RETURN.
Settings
None, WPA2-PSK (AES)
NOTE
• If you select "None", the connection might not be completely secure
since communications will not be encrypted.
8
Use the cursor keys (/) to select "Security Key",
and then press ENTER.
KEY
NOTE
• If you select "None" in Step 7, the security key setting will be
unavailable. Skip to Step 10.
9
Use the cursor keys to enter a security key, and then
press ENTER.
Enter either an 8 to 63-character string or a 64-digit
hexadecimal number.
Use the cursor keys (/) to select a character. Use the
cursor keys (/) to move the edit position.
You can insert or delete a character by pressing PRESET >
(insert) or PRESET < (delete).
You will need the security key in Step 11 to configure the Wi-Fi
settings for your mobile device.
10
Use the cursor keys (/) to select "Connect
[ENT]", and then press ENTER.
27