a. Lay the PCI riser board assembly in the chassis, and ensure that the
system power cable is clear of the PCI riser board assembly
thumbscrew plate.
b. Align the tabs
assembly with the retainers
Figure 3-46. Aligning the rear edge of the PCI riser board assembly with the
chassis
c. Press down firmly along the 64-bit expansion slot
riser board assembly is seated in the expansion slot.
d. Tighten the PCI riser board assembly thumbscrew
2
Figure 3-47. Installing the PCI riser board assembly
along the lower rear corners of the PCI riser board
on the rear panel of the chassis.
1
2
1
Installing Hardware Options 3-51
until the PCI
.