Turning The Unit On - Zoom AC-3 Operation Manual

Turning the unit on

• Minimize the volume of the output device.
• Prepare the power source.
Using an AC adapter
Connect the AD-16 adapter to the
• Set the power switch to "ON" or "eco".
NOTE
The power indicator lights red when the remaining battery power becomes low.
Replace the batteries with new ones.
• Turn the output device on, and raise its volume.
HINT
You can also use a USB cable to connect the
POWER switch "eco" setting
The power will automatically turn off if unused for 10 hours.
If you want the power to stay on always, set the POWER switch to "ON".
Using batteries
. Open the battery cover on the bot-
tom of the unit and install batter-
ies into the battery compartment.
Power indicator
(front panel)
to a computer and power it with USB bus power.
7
Lit green: Remaining
battery power okay
Lit red: Remaining bat-
tery power low