Clicking; Double-Clicking; Pointing; Dragging - Fujitsu LifeBook E Series Instructions Manual

How to use the flat point

Clicking

To "click," press and quickly release the left button
once or tap the operating panel once. To "right-
click," press and release the right button once.

Double-clicking

To "double-click," tap the operating panel twice
in rapid succession or press the left button twice.
You can adjust the double-click speed, using the
"Mouse Properties" dialog box.

Pointing

To point means to move the mouse pointer onto
an object or a menu item on your desktop. When
you point to an object, the object is highlighted
or an explanation of the object is displayed. If
the menu item to which you pointed has a sub-
menu*, the submenu will appear on the screen.

Dragging

To drag an object from one place to another:
Move the mouse pointer onto the object, tap the
operating panel twice in rapid succession, move
your finger along the panel surface without taking
your finger off the panel after tapping the panel
for the second time, and take your finger off when
the object reaches the position where you want
to place it. Or, move the mouse pointer onto the
object, move your finger along the panel surface
while holding down the left button, and take your
finger off the panel when the object reaches the
position where you want to place it.
Or
Or
G e t t i n g t o K n o w Yo u r L i fe B o o k
Or

Scrolling

To scroll up or down through a document in the
window, click the area where the document you
want to scroll is displayed, and then press the
scroll button forward or toward you.
To move upward: Press the
button forward.
To move downward: Press the
button toward you.
The functions of the left and right buttons
described above hold when the buttons
are configured for right-handed persons.
You can change the functions assigned
to them, using the "Mouse Properties"
dialog box.
When tapping the operating panel, do it
lightly and quickly with a finger tip. It is
not necessary to apply an excessive
pressure to the operating panel.
The mouse pointer moves on the screen
in the same direction you move your
finger along the operating panel surface.
When your finger reaches an edge of the
operating panel, take your finger off the
panel temporarily and put it in another
area on the panel, and then restart
moving your finger along the panel
surface.
To use the scroll button at the center, you
need to install the supplied "Alps Pointing-
device Driver" in advance.
21