Connecting the Camera with Your Computer
Downloading and Installing the PC Software:
Download the PC software "PIXPRO 360 VR Suite" installation package
install it on your computer by following the prompts on the interface.
Americas
http://kodakpixpro.com/Americas/support/downloads.php
After successful installation, this icon
Establishing a Connection:
1
Wi-Fi Connections (supports: Wi-Fi Control, Download & Playback)
1. Camera: Check SSID (PIXPRO-ORBIT360_XXXX / PIXPRO-4KVR360_KXXXX) and password (initial factory password:
12345678) indicated on the label in the battery compartment of the camera. In the main interface of the
camera, press the
2. PC: To enable Wi-Fi mode, the camera will automatically search nearby Wi-Fi hotspots. Select the camera's SSID
(PIXPRO-ORBIT360_XXXX / PIXPRO-4KVR360_KXXXX) and input your password. When connected via Wi-Fi,
you will be able to double-click the software icon
When the Wi-Fi connection password is altered using your smart device, the connected password in the
computer will simultaneously change. Please enter your new updated password.
If you forget the Wi-Fi connection password, you can use the reset function on the camera to reset it to the
factory default password: 12345678.
will appear on your desktop.
button to switch to Wi-Fi mode.
from our KODAK PIXPRO official website and
Europe
http://kodakpixpro.com/Europe/support/downloads.php
on the desktop of your computer to start it.
6